Aussie Peptides · AU
BPC-157 + TB-500 Blend 10mg (5mg / 5mg)
$169.00
$184.00
Why Aussie Peptides
Lot-matched certificate
Independently analysed before release; look the lot up on the verification page.
Strictly research use
Not for human or veterinary consumption.
Express AU shipping
Discreet, fully tracked, 1–3 business days.
Aussie Peptides · specification
BPC-157 + TB-500 Blend 10mg (5mg / 5mg)
- Presentation
- 10mg sealed glass vial
- SKU
- BPC-157-TB-500-BLEND-10MG
- Format
- Lyophilised powder
- Purity
- ≥99% release specification by RP-HPLC — result recorded per lot
- Documentation
- Batch-specific Certificate of Analysis
- Storage
- 2–8 °C, protect from light
- Dispatch
- Cold-chain, same-day, Australia-wide
- Origin
- Packed in Australia · Aussie Peptides
- Category
- Recovery
Specifications are standardised across the Aussie Peptides range. Batch values — lot number, assay result and expiry — are printed on the vial and matched to the Certificate of Analysis supplied with your order.
The Aussie Peptides label
- 1
Coral spine + hexagon mark
Every Aussie Peptides vial carries the same coral spine and molecular hexagon so a genuine vial is recognisable at a glance.
- 2
Compound, strength, fill volume
Printed in a fixed position on the cream label — compound name, strength in milligrams, and vial volume.
- 3
LOT + EXP fields
Hand-stamped per batch and matched to the Certificate of Analysis you can look up on our CoA page.
- 4
Lot-tested by RP-HPLC — research use only
The compliance line appears on every label, on every SKU, without exception.
BPC-157 — strengths and blends
Same batch-tested material, different presentations. Higher-strength vials lower the cost per milligram; blends arrive pre-combined in a single lyophilised cake so one reconstitution covers both compounds.
Laboratory handling · Repair-pathway research peptide
Usage & handling guide
A short lyophilised peptide. Dissolves readily and should be aliquoted straight after reconstitution.
- Reconstitution
- 2 mL bacteriostatic or sterile water for a standard bench stock
- Stock concentration
- ≈ 5.0 mg/mL (10 mg ÷ 2 mL)
- Storage once reconstituted
- 2–8 °C, upright, protected from light
- Stability window
- Use reconstituted stock within 14–21 days at 2–8 °C; freeze single-use aliquots at −20 °C for longer holds
1 · Equilibrate before opening
Let the sealed vial reach room temperature before breaking the seal. Opening a cold vial draws in moisture, and lyophilised peptide is hygroscopic.
2 · Add diluent down the wall
Direct the diluent slowly against the inside wall of the vial rather than onto the powder cake. A fast stream shears the peptide and lowers recovery.
3 · Dissolve, never shake
Swirl or roll gently until the cake is fully dissolved. Vortexing or shaking foams the solution and denatures peptide at the air–liquid interface.
4 · Inspect the solution
A correctly reconstituted stock is clear and free of visible particulate. Cloudiness, fibres, or a film indicates the stock should be discarded.
5 · Aliquot for single use
Split the stock into single-use aliquots in low-bind tubes and label each with compound, concentration, LOT and date. Repeated freeze–thaw is the most common cause of lost potency.
6 · Record against the CoA
Log the LOT number and the batch Certificate of Analysis reference alongside your results so every data point is traceable to a tested batch.
Figures above are worked examples for bench preparation only. Always calculate your own working concentrations from the strength printed on the vial, the exact diluent volume you added, and the batch assay result on the Certificate of Analysis.
Safety & handling cautions
- Do not warm the reconstituted stock above room temperature to speed dissolution.
- Discard any stock showing cloudiness or particulate rather than filtering and reusing it.
- Wear appropriate PPE, work in a clean and controlled area, and dispose of vials, sharps and unused stock in line with your institution’s waste procedures.
Important — no dosage advice
This guide covers reconstitution, storage and laboratory handling only. Aussie Peptides does not publish, supply or advise on human or veterinary dosing, administration schedules, or therapeutic protocols for any product, and nothing here should be interpreted as such.
All products are supplied strictly for in-vitro laboratory research by qualified professionals. They are not medicines, are not evaluated by the TGA, and are not for human or animal consumption. Nothing on this page is medical advice — speak to a qualified healthcare professional about any health matter.
In depth
BPC-157 + TB-500 Blend ( / ) in Australia — research notes
The BPC-157 + TB-500 blend puts 5mg of each peptide in one lyophilised vial — the pairing most often referenced together in connective-tissue repair literature, supplied ready to reconstitute as a single stock.
- 5mg BPC-157 + 5mg TB-500, fixed 1:1 ratio
- Blend lot re-assayed after combining, not just the components
- 5mL diluent gives 1mg/mL of each compound
What a blended vial actually is
Each component is synthesised and assayed separately to ≥99% HPLC purity, then combined and lyophilised together under vacuum. The finished lot is re-assayed as a blend, so the certificate confirms both sequences by mass spectrometry and states the ratio rather than relying on the component certificates alone.
Reconstitution and ratio arithmetic
Total peptide mass is 10mg at a 1:1 ratio. Reconstituted with 5mL of bacteriostatic water the vial yields 1mg/mL of BPC-157 and 1mg/mL of TB-500 simultaneously — a 0.5mL draw contains 500mcg of each. Because the ratio is fixed, a blend suits protocols studying the combination; separate vials remain the correct choice when the two need independent variation.
Blend vs two single vials
A blend is one seal, one reconstitution and one stock to refrigerate, and it prices below two 5mg vials bought separately. The trade-off is flexibility: you cannot alter one component without altering the other. Every vial ships from our Australian storage and dispatch facility with a lot-matched certificate of analysis and cold-chain packaging.
About this compound
Research overview
A pre-blended research vial containing 5mg BPC-157 and 5mg TB-500 in a single lyophilised cake, reconstituted once for paired connective-tissue and cell-migration comparisons without weighing two vials. Each component is HPLC verified ≥99% pure before blending and the finished lot carries its own Certificate of Analysis. For research purposes only. Not for human consumption.
Compliance
For in‑vitro research only.
Products supplied for laboratory research. Not for human or veterinary consumption. Buyer assumes all responsibility.
Read compliance →Questions
BPC-157 + TB-500 Blend 10mg (5mg / 5mg) — frequently asked
What is BPC-157 + TB-500 Blend ( / )?+
A pre-blended research vial containing 5mg BPC-157 and 5mg TB-500 in a single lyophilised cake, reconstituted once for paired connective-tissue and cell-migration comparisons without weighing two vials. Each component is HPLC verified ≥99% pure before blending and the finished lot carries its own Certificate of Analysis. Aussie Peptides supplies BPC-157 + TB-500 Blend ( / ) strictly as an in-vitro laboratory reference material — it is not a therapeutic good and is not for human or veterinary use.
How pure is Aussie Peptides BPC-157 + TB-500 Blend ( / )?+
Each BPC-157 + TB-500 Blend ( / ) lot is analysed by RP-HPLC for purity and by mass spectrometry for identity, and is released against a ≥99% purity specification. The result belongs to that lot: the number printed on your vial maps to its own Certificate of Analysis, so the figure can be recorded alongside your experimental data rather than assumed.
How is BPC-157 + TB-500 Blend 10mg (5mg / 5mg) reconstituted and stored in the lab?+
2 mL bacteriostatic or sterile water for a standard bench stock That gives a working stock of roughly ≈ 5.0 mg/mL (10 mg ÷ 2 mL). Reconstituted vials are held at 2–8 °c, upright, protected from light, and use reconstituted stock within 14–21 days at 2–8 °c; freeze single-use aliquots at −20 °c for longer holds Sealed lyophilised 10mg vials are stable long-term at -20°C.
Is it legal to buy BPC-157 + TB-500 Blend ( / ) in Australia?+
BPC-157 + TB-500 Blend ( / ) is supplied in Australia for in-vitro laboratory research only. It is not approved by the TGA as a therapeutic good and is not sold for human or veterinary consumption. Purchasers must be 18 or over and are responsible for handling, storage and disposal under their own institutional and legal requirements.
How much is BPC-157 + TB-500 Blend 10mg (5mg / 5mg) and how fast does it ship?+
BPC-157 + TB-500 Blend 10mg (5mg / 5mg) is $169.00. It is in stock and dispatched same business day on orders placed before 12pm AEST. Shipping is A$12.95 express Australia-wide and free over A$199, sent discreetly packaged and fully tracked, typically 1–3 business days.
What does the research on BPC-157 + TB-500 Blend ( / ) investigate?+
Published work on this class focuses on tissue repair, cell migration and inflammatory signalling in in-vitro and animal models. Nothing on this page is a dosing protocol, medical advice, or a claim of therapeutic benefit — it summarises what the published literature examines.
Keep exploring
